R28 - BOXING BAG RING - DBX BUSHIDO

Chain ring for the R28 punching bag

 for bags with a diameter of 30 to 40 cm

Your room is too low and you need to shorten the length of the chain on your punching bag?
Or maybe you are annoyed by the tightening effect of the bag in its upper zone?
Using a ring for the chains of the bag will effectively solve your problem.

By using a ring, you will not only increase the life of the chains and the bag itself, but you will also get rid of the effect of tightening the walls of the bag in its upper zone, which not only spoils the visual effect but also reduces the training surface.

The ring has a diameter of 28 cm and is suitable for punching bags with a diameter of 30 to 40 cm

The ring can be attached to different chain heights, adjusting the arrangement of the chains to your needs.

The ring has a screw connection so you can put it on and take it off yourself without interfering with the bag's chains

Technical parameters of the R28 punching bag ring:

• diameter: approx. 28cm
• purpose: bags with a diameter of 30 - 40 cm
• material: steel

FAQ – frequently asked questions:

1. I have a bag with a diameter of 40 cm, should I use the R28 or R38 ring

Both sizes will be correct.

2. Where should the ring be installed?

The ring can be mounted at any chain height, depending on the effect we want to achieve

3. Will the chains of the bag not slip around the ring?

The ring should be selected so that its diameter is a few cm smaller than the diameter of the bag, which will prevent the chains from slipping. Optionally, you can additionally use "U-bolts" to permanently connect the ring with the chains.

4. I can't put on the ring because the lazybone's links are too narrow.

In such a situation, it is recommended to expand / break the selected chain links to a width that allows the ring to be installed.